How to Create an Indoor Painted Rug

Posted by: on July 5th, 2013 | 2 Comments
Do you like this article?

How to Create an Indoor Painted Rug: The finished project

 
This painted rug will be a striking addition to the floor of any room. Follow the step-by-step instructions for this DIY project. We also have downloadable instructions you can print.

Skill Level: Intermediate
Time: 24-48 hours, including taping, measuring and drying time
Cost: $120
 

Tools and Materials

  • 1 gallon Behr #434 Oil-Based Primer
  • 1 gallon Behr Porch & Floor Paint Low Luster Ultra-Pure White, tinted to Home Decorators Collection Crème De Caramel
  • 1 gallon Behr Ultra Sandstone Cove
  • Roller tray set
  • Polypropylene paint tray liner
  • 2-inch painter’s tape
  • Yardstick
  • Tape measure
  • Disposable gloves
  • Painter’s pole
  • Pencil

Shop for these materials at The Home Depot. 

 

How to Create an Indoor Painted Rug: Taping the perimeter of the painted rug

 

Step 1

Make sure your floor is clean. Then mark the outside dimensions of your 5-foot x 7-foot rug with a pencil and tape just outside the lines.

Leave the pencil marks exposed so they will be painted over.

 

How to Create an Indoor Painted Rug: Applying primer

 

Step 2

Prime your floor with Behr #434 Oil-Based Primer. Use a 9-inch roller attached to a painter’s pole to cover the interior of your taped rectangle.

Apply two coats, and wait about two hours between coats.

 

How to Create an Indoor Painted Rug: Painting the first coat

 

Step 3

After you have allowed the primer to dry completely, apply your first coat of Behr Porch & Floor Paint (Crème De Caramel); wait four hours and apply your second coat.

Allow this base color to dry for about six hours.

 

How to Create an Indoor Painted Rug: Measuring and marking the stripes

 

Step 4

Now begin drawing the lines of the stripes. Starting at one end of your rectangle going lengthwise, use a tape measure to mark off every 6 inches to the opposite end. Do this on both sides of the rectangle, and then connect the two marks by drawing a straight line with a yardstick.

Tape off every alternating stripe, leaving the pencil marks exposed inside the area to be painted.

 

How to Create an Indoor Painted Rug: Painting the stripes

 

Step 5

Now you can begin painting your stripes using the Behr Ultra Sandstone Cove.

After your first coat, wait four hours, then apply your second coat.

 

How to Create an Indoor Painted Rug: Removing the painter's tape

 

Step 6

Allow the second coat to dry about two hours, then remove the tape. Pull the tape off at a 45-degree angle; this will help the tape break free from the painted edge without pulling up the fresh paint.

Allow 24 hours cure time before putting your new rug to use.

 

How to Create an Indoor Painted Rug: The finished project

 

Step 7

The result: a beautiful painted rug as a focal point for your room!

Download printable instructions for this DIY painted rug and get started!

And while you’re at it, take a look at more DIY projects here on The Home Depot blog.

Tags: , , ,

Leave a Comment




  1. Amber says:

    I do not know how stupid ANYONE would be to paint their WOOD FLOORS. This is really horrible to promote, and I feel sorry for anyone who thinks this will be awesome.

    • Patric says:

      It is a great alternative to refinishing. Refinishing old wood floors can be costly ( whether you DIY or have someone else do it for you) and very time consuming. Plus refinishing with paint is way more chic than it is to just use plain old boring stain/or not and polyurethane. That’s like 70′s crap.